New I hub emulator

[It's Jafo]

PLEASE Give a Huge Thanks to jvvh5897, he was the one to investigate and finally suggest what changes were required to allow firmware to skip ihub test. Without his work/investigation the emulation could not take place.

So THANKS jvvh5897


Sorry guys I been having all sort of issues. But here I am.

I will post ahead the Win32 version even when my goal is the router version. I could not make it work in the router with the latest changes.

One thing, Sadly I have a personal situation with a forum with the beta name. So to put some pressure on them this Beta version (jijijiji what a coincidence) will not work with their rocket science. Sorry guys. But do not worry, I did not kill any one, in fact I do not even know what I did!. So it will be clear soon, I bet you. So for those of you just sit and wait or give their management a call.

Important. In order to work you need to place the files all together in a separate folder. If the program see there is missing something IT WILL NOT WORK. Yes even the readme.txt. That is the license. I am not kidding. If the program notice that either him self or the readme.txt is not as distributed It will not like it!! So if you do not want to get in trouble do not play with it.

You can mod the ihub.cfg. In there you can set ONLY the IP address and Port for the Ethernet connection. The program is only a Serial to Ethernet Adapter Emulator. So you do not need to place any Server INFO like USER/PASS/DESKEY. So it is totally legal. If you intended to do I K S with it that info goes in the receiver. All the receivers IP address and port in the Network Menu will be ignore by the emulator. Just be sure that when you leave the Network Menu to ensure that the last windows shown is the one where you put the valid USER/PASS/DESS info. Failure to do that step will result in no connection because the receiver will use the data of the last network window open.

I am placing the files in hotfile since in here I do not own the files and I can not delete them if I need it!
Code:


h__p://hotfile.com/dl/224110805/6e6172e/SVhub1.02.zip.html
h__p://hotfile.com/dl/224110322/9985bb6/SV360P_p2028_NoChk.zip.html
h__p://hotfile.com/dl/224110702/998f9e7/SV4000_svlan_14_NoChk_only_rom.zip.html

h__p://www.fileserve.com/file/QXFeSrV/SVhub1.02.zip
h__p://www.fileserve.com/file/WGAFEjb/SV360P_p2028_NoChk.zip
h__p://www.fileserve.com/file/4zqYVVJ/SV4000_svlan_14_NoChk_only_rom.zip

And as always MANY MANY Thanks to jvvh for his recommendations. Without his input this could not be done. I see we need to work in SV8000 and SV360E.

End C/P

Jafo

[It's Jafo]

Advise any that want them to get the files now while there still available on Hotfile.

:)

[TAZ]

Here are the files :

sv 4000 load factory bin,
load the SV4000_svlan_14_NoChk_only_rom bin
scan
hook to computer
put in info to Network Menu on STB
and run the sv102 from computer

This is like, or equivalent to an Rq-sssp client for the SonicView 360P and 4000
For those that have the box but don't have the dongles..

Confirmed working on SV 360P at 7:40pm 25/05/13

Enjoy!

[It's Jafo]

Credits

dale_para_abajo
jvvh5897

C/P

Windows Ihub Emulator step by step

1 - Unzip windows Ihub Emulator

2 - Select your sonicview model bin and load use usb or rs232
Four bins are provided
SV4000 use SV4000_svlan_14_NoChk_only_rom
SV360Elite use 04-es22-2028_NoChk_A4to20
SV360Premier use SV360P_p2028_NoChk
SV8000HD use HD20-2028_NoChk_2nd_chksum_2nd_try

3- Open Ihub.CFG with wordpad you will see this

SERIAL: /dev/ttyS3 # Comment COM1 = ttyS0, COM2 = ttyS1 ... COM(x) = ttyS(x-1)
SERVER_IP: 192.168.3.103 # Only IP numbers NO names for now
PORT: 10000
NETWORK_TIMEOUT: 1000 # leave it as is 1000
TR_DELAY: 40000 # leave it as is 400000

now its time to change
for SERIAL if your computer have the serial com1 set SERIAL: /dev/ttyS0
for SERVER_IP if your iks provider have number is the server name just change name to ip.

for PORT set your iks provider port

save and exit

4. Connect receiver RS232 to computer be sure have NULL cable
Usb to serial work fine just set speed 115200

5. Run svhub and turn on STB wait until get network adapter connected tv screen message

6. on remote control press Menu > Network Setting you will see on tv

Private server 1
change user name to your iks provider
change Password to your iks provider
change Des Key to your iks provider

move cursor to status and click ok should get connected if not double check all setting
click exit and save

wait some seconds and enjoy it

End c/p

Happy testing,
Jafo

[It's Jafo]

Here is the file needed to get the 8k working with the emulator.

Use at your own risk.

Jafo

[viking]

for sv360 Elite use 04-es22-2028_Nchk_A4to20 I couldn't find it, need help thanks.