Missing Channels on CW 700s

[Kallaco]

Hi

I entered the tp frequency as Lyngsat info but some channels are missing in my CW 700s
Some are 302, 303, 304 and all PPV

Any idea?

[Sammy]

Post your setup.

[Kallaco]

My CW 700s is connected with an X-FTA router. I loaded the factory bin for the 700s and then the Japan 2.66 for this box

I do a scan with both birds 119 & 110. I get channels execpt the listed before and a lot more.

[Sammy]

Need the settings in the installation menu

[Kallaco]

Hi Sammy

In Installation I have:

Sat-119
Trans-12224/V/20000/5/6
LNB Freq-11250
LNB Type-Normal
22KHz-Off
Diseqc-None
Leg SW-SW42 #1
Moto-None

The same for 110 except Leg SW-SW42 #2

Also in System th Auto Tp is on

Any Help will be appreciated




Need the settings in the installation menu

[Sammy]

The same for 110 except Leg SW-SW42 #2
, do you have this kind of switch?

[tester4]

fine tune your dish.

[Kallaco]

I use a SW44 and in the other box (VS) I set up as SW42 and I get good signal and quality on both birds.



The same for 110 except Leg SW-SW42 #2
, do you have this kind of switch?

[Sammy]

There is a ws44 in the antenna setup try that!

[@night™]

Hi Sammy

In Installation I have:

Sat-119
Trans-12224/V/20000/5/6
LNB Freq-11250
LNB Type-Normal
22KHz-Off
Diseqc-None
Leg SW-SW42 #1
Moto-None

The same for 110 except Leg SW-SW42 #2

Also in System th Auto Tp is on

Any Help will be appreciatedtransponder should be 12268 or 12254 IMHO for 119
for 110 it should be12224 i be-leave 119 is more finicky

[Kallaco]

Someone have the updated channel list for th CW 700s?

[Kallaco]

Hi All

I want to thanks Sammy that give me an idea. I scanned both birds changing the installation setup and selecting swith 21 then saving channels and scanning selecting switch 42 and now I get all channels.

Apparently the box have some issues when I select switch 42 only.

Thanks to all people that take care of my issue, especially Sammy.

THANKS......................

[Sammy]

Thanks for the kind words.