nfusion-62.zip
Just use the info in the 1st Post

Here is some loading instructions for whatever S/W is on you unit

Loading bin 6.2 Guide(Epg) Menus

Be sure to do the factory defaults when asked.
if it says menu on front means you tried to load a boot file to main or bin file to boot. it is an error.

once you have a customfta nfusion bin working you never have to load the files again ever.

==================================================
How to Load Nfusion units.
I see alot of people having problems loading units.
Here is how I do it.
--------------------------------------------
This is loading a new nfusion out of box.

Open Nfusion Uploader 1.31 or UploaderLite
1.Load nfusion_factory_U17.bin (USE MAIN ON LOADER DO NOT USE BOOT TO LOAD MAIN FILE)
2.Do Factory Default
3.Load nfusion_boot_v130.bin in Boot Mode (DO NOT USE MAIN TO LOAD BOOT)
4.Load custombin (USE MAIN ON LOADER DO NOT USE BOOT TO LOAD MAIN FILE)
5.Do Factory Default (Must Do)
6.Done Go to working channel Guide will populate Quickly
--------------------------------------------
This is loading a nfusion unit that has only had nfusion s/w loaded

Open Nfusion Uploader 1.31 or UploaderLite.
1.Load nfusion_boot_v130.bin in Boot Mode (DO NOT USE MAIN TO LOAD BOOT)
2.Load nfusion_factory_U17.bin (USE MAIN ON LOADER DO NOT USE BOOT TO LOAD MAIN FILE)
3.Do Factory Default
4.Load custombin (UseMAIN ON LOADER DO NOT USE BOOT TO LOAD MAIN FILE)
5.Do Factory Default (Must Do)
6.Done Go to working channel Guide will populate Quickly
--------------------------------------------
This is loading a nfusion unit that has G3X or boris t running on it.

Open Nfusion Uploader 1.31 or UploaderLite
1.Load g3xtorx3_v1.23.bin in Boot Mode (DO NOT USE MAIN TO LOAD BOOT)
2.Load nfusion_boot_v130.bin also in Boot Mode
3.Load nfusion_factory_U17.bin (USE MAIN ON LOADER DO NOT USE BOOT TO LOAD MAIN FILE)
4.Do Factory Default
5.Load custombin (USE MAIN ON LOADER DO NOT USE BOOT TO LOAD MAIN FILE)
6.Do Factory Default (Must Do)
7.Done Go to working channel Guide will populate Quickly
--------------------------------------------
This is loading a nfusion unit that already has a custombin running.
Make Sure you have the 1.30 Boot if not load it first, then Power off and On Continue
1.Load nfusion-xx.bin
2.Done Go to working channel Guide will populate Quickly
--------------------------------------------
To return unit back to factory default.
Open Nfusion Uploader 1.31 or UploaderLite
1.Load nfusion_boot_v130.bin (DO NOT USE MAIN TO LOAD BOOT)
2.Load nfuison_factory_U17.bin (USE MAIN ON LOADER DO NOT USE BOOT TO LOAD MAIN FILE)
3.Done Go to working channel Guide will populate Quickly
--------------------------------------------


you can use the key for 6.1 bin

if you already have key on 6.1 you do not need to re-enter key or Information just load 6.2

Otherwise use the trial for 6.2

If you are entering New Authorization Key
You will be able to reenter key at any time.

Now go to System Features and select ok
Enter Password 1112
Enter Authorization Key here
Menu to Exit to Save


There is also an autosetup feature for sat scanning. With the bin