Everthing you need to get your Coolsat 4/5/6000 up with P$
Updated 3/3/12
Just passing this along......
Hope it helps someone
------------------------------------------------------------------------------------------------------------------
C&P__________________________________-
Make sure you know your Dish/LNB settings BEFORE loading any Channel List
The 119/110 Channel list included has Dish/Pro settings...if you are using anything else you will need to re-set your Dish/LNB/Switch settings(the channel list also has the CAID MisMatch fixed)
Open the Loader____
Load Coolsat with your model (coolsat4000-rq-100.stb or coolsat5000-rq-100.stb or coolsat6000-rq-100.stb)
when finished open loader again and click Channels.make sure To Reciever is checked and load the
Coolsat channel list Updated Ch List- feb-28.ndf.....(let reciever reboot)it will say finished when done.......
(leave serial cable hooked to coolsat and puter)
Close Loader
Hook up TV/Sat reset your Dish/LNB settings (if needed)..
Open the folder that says RQ
Open the Config file in wordpad and add your P$ INfo at bottom(last line)
name---xxxxx
password---xxxx
domain---xxxx
port-- xxxx
Des Key----0102030405060708091011121314
Example------
card_server_url_0=newcamd://namexxx:passwordxxx@xxxxxxx:portxx/0102030405060708091011121314
Close and Save
double click on the round Shaded RQ
you should see a black box with connected and waiting for response....
now put the coolsat on a channel(like 200 ) --TV should come right on.....
RQ has to run all the time while your watching TV
Good Luck and Happy Testing