Hello and welcome to our community! Is this your first visit?
Register
Page 1 of 2 12 LastLast
Results 1 to 10 of 20

Thread: nano premium

  1. #1
    IKS66 Member
    Join Date
    Apr 2013
    Posts
    30

    nano premium

    I have a nano premium and I have updated all files and installed s1.iks66.tv as per Rob318us rechecked several times and rebooted on back as well as Fn1 key but still get "scramble" any suggestions would be appreciated!
    thanks
    kermitii

  2. #2
    Super Moderator
    Join Date
    Feb 2013
    Posts
    2,032
    Is the receiver communicating with the router?
    Check in the Network menu for the IP to populate. While in that menu, disconnect the Ethernet cable from the back of the receiver and then change the menu and go back to the IP menu and it should show all zeros. Then reconnect the ethernet. The IPs should repopulate.
    Then exit the menu to a tv channel.... and does it show connect 1 or 2 at the bottom of the screen?

  3. #3
    IKS66 Member
    Join Date
    Apr 2013
    Posts
    30
    I followed your directions and all went as per them except that at the bottom of the sreeen it says Connection: but no 1 or 2!
    thanks
    kermitii

  4. #4
    we need a bit more ifo..post your settings maybe we can help you ther bud

  5. #5
    IKS66 Member
    Join Date
    Apr 2013
    Posts
    30
    By settings do you mean Dream 1, NewCam s1.iks66.tv port 50066 DESkey 1234123412341234123412341234 route 25etc and have checked routes are active and running! If you mean some other settings I will be happy to provide them!
    thanks
    kermitii

  6. #6
    yes the other settings like antenna settings.and what sat are you locked on..thank you

  7. #7
    IKS66 Member
    Join Date
    Apr 2013
    Posts
    30
    119 and110 channel 200, 121 etc. very strong signal! When I go directly from my modem to SAT I do not get the IP to populate but it does through my router Linskys!
    thanks
    kermitii

  8. #8
    on your antenna settings you have a like
    antenna 119
    lnb type
    diseqc
    etc,etc,post all than info please

    ohhh one more thing make sure you receiver is plugged to your router

  9. #9
    IKS66 Member
    Join Date
    Apr 2013
    Posts
    30
    OK will try
    lnb standard 10750 for 119
    lnb standard 11250 for 110
    diseqc 110 3, 119 4
    yes plugged into router and populate IP after Apply repopulates!
    thanks
    kermitii

  10. #10
    what type of lnb are you using DP,DPP,OR WHICH ONE,,are you using linear lnb?


 
Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •