Hello and welcome to our community! Is this your first visit?
Register
Page 1 of 2 12 LastLast
Results 1 to 10 of 16
  1. #1
    IKS66 Junior Member
    Join Date
    May 2015
    Posts
    14

    having problem with scanning channels on 110 & 119

    Hi , im having a problem scanning channels on a dreamlink t5 receiver, i put the newest file 106 and did a reset, setup my diseqc and del channels. Then i scanned channel on 110 and 119 but can't get 120 or 150 and not even 101. the network says ok. Any ideas on what i am doing wrong? tp are not good i think.

  2. #2
    Moderator whynot's Avatar
    Join Date
    Dec 2013
    Location
    Dark Side Of Moon
    Posts
    327
    when you scan are you on 119 top right will tell you

  3. #3
    Super Moderator
    Join Date
    Feb 2013
    Posts
    2,011
    110w
    TP 1 = 12224 R / 21.500 MS/s / Turbo 8PSK / FEC 2/3
    TP 2 = 12239 L / 21.500 MS/s / Turbo 8PSK / FEC 2/3
    TP 3 = 12253 R / 21.500 MS/s / Turbo 8PSK / FEC 2/3
    TP 4 = 12268 L -Spot Beam
    TP 5 = 12282 R / 21.500 MS/s / Turbo 8PSK / FEC 2/3
    TP 6 = 12297 L / 21.500 MS/s / Turbo 8PSK / FEC 2/3
    TP 7 = 12311 R / 21.500 MS/s / Turbo 8PSK / FEC 2/3
    TP 8 = 12326 L / 21.500 MS/s / Turbo 8PSK / FEC 2/3
    TP 9 = 12341 R / 21.500 MS/s / Turbo 8PSK / FEC 2/3
    TP 10 = 12355 L / 21.500 MS/s / Turbo 8PSK / FEC 2/3
    TP 11 = 12370 R / 21.500 MS/s / Turbo 8PSK / FEC 2/3
    TP 12 = 12384 L -Spot Beam
    TP 13 = 12399 R / 21.500 MS/s / Turbo 8PSK / FEC 2/3
    TP 14 = 12414 L / 21.500 MS/s / Turbo 8PSK / FEC 2/3
    TP 15 = 12428 R / 21.500 MS/s / Turbo 8PSK / FEC 2/3
    TP 16 = 12443 L / 21.500 MS/s / Turbo 8PSK / FEC 2/3
    TP 17 = 12457 R / 21.500 MS/s / Turbo 8PSK / FEC 2/3
    TP 18 = 12472 L -Spot Beam
    TP 19 = 12486 R / 21.500 MS/s / Turbo 8PSK / FEC 2/3
    TP 20 = 12501 L -Spot Beam
    TP 21 = 12516 R / 21.500 MS/s / Turbo 8PSK / FEC 2/3
    TP 22 = 12530 L / 21.500 MS/s / Turbo 8PSK / FEC 2/3
    TP 23 = 12545 R -Spot Beam
    TP 24 = 12559 L / 21.500 MS/s / Turbo 8PSK / FEC 2/3
    TP 25 = 12574 R -Spot Beam
    TP 26 = 12588 L -Spot Beam
    TP 27 = 12603 R -Spot Beam
    TP 28 = N/A
    TP 29 = 12632 R -Spot Beam
    TP 30 = N/A
    TP 31 = 12661 R -Spot Beam

    119w
    TP 1 = 12224 R -Spot Beam
    TP 2 = 12239 L -Spot Beam
    TP 3 = 12253 R -Spot Beam
    TP 4 = 12268 L -Spot Beam
    TP 5 = 12282 R -Spot Beam
    TP 6 = 12297 L / 21.500 MS/s / Turbo 8PSK / FEC 2/3
    TP 7 = 12311 R / 21.500 MS/s / Turbo 8PSK / FEC 2/3
    TP 8 = 12326 L / 21.500 MS/s / Turbo 8PSK / FEC 2/3
    TP 9 = 12341 R / 21.500 MS/s / Turbo 8PSK / FEC 2/3
    TP 10 = 12355 L / 21.500 MS/s / Turbo 8PSK / FEC 2/3
    TP 11 = 12370 R / 21.500 MS/s / Turbo 8PSK / FEC 2/3
    TP 12 = 12384 L / 21.500 MS/s / Turbo 8PSK / FEC 2/3
    TP 13 = 12399 R / 21.500 MS/s / Turbo 8PSK / FEC 2/3
    TP 14 = 12414 L / 21.500 MS/s / Turbo 8PSK / FEC 2/3
    TP 15 = 12428 R / 21.500 MS/s / Turbo 8PSK / FEC 2/3
    TP 16 = 12443 L / 21.500 MS/s / Turbo 8PSK / FEC 2/3
    TP 17 = 12457 R / 21.500 MS/s / Turbo 8PSK / FEC 2/3
    TP 18 = 12472 L / 21.500 MS/s / Turbo 8PSK / FEC 2/3
    TP 19 = 12486 R / 21.500 MS/s / Turbo 8PSK / FEC 2/3
    TP 20 = 12501 L / 21.500 MS/s / Turbo 8PSK / FEC 2/3
    TP 21 = 12516 R / 21.500 MS/s / Turbo 8PSK / FEC 2/3
    IKS66.com #1 IKS Private Server

    -simple truth, rule #53
    Never take life seriously. Nobody gets out alive anyway.

  4. #4
    IKS66 Junior Member
    Join Date
    May 2015
    Posts
    14
    I don't have 30% of those tp and it takes a long time to detect transponders , do i need a new box. I have change the diseqc sw for a chita diseqc, changed both lnb, what do you think to try next

  5. #5
    IKS66 Junior Member
    Join Date
    May 2015
    Posts
    14
    yes it does say 119 on top corner, but it take a long while before it locks in. same as when i was changing ch, it takes 4 to 5 sec before it lock in
    Last edited by yesmam; 01-11-2017 at 04:35 PM.

  6. #6
    Moderator whynot's Avatar
    Join Date
    Dec 2013
    Location
    Dark Side Of Moon
    Posts
    327
    check all you connection and make sure they are ok and you can add that by yourself to and your board could be going bad oh and what lnb are you using
    Last edited by whynot; 01-11-2017 at 04:52 PM.

  7. #7
    IKS66 Junior Member
    Join Date
    May 2015
    Posts
    14
    dish digital lnbf BSNA-506 A single lnb
    not sure what you mean by i can add . do you mean tp ?

    TP 1 = 12224 R / 21.500 MS/s / Turbo 8PSK / FEC 2/3 mine is red but FEC is Auto

    TP 2 = 12239 L / 21.500 MS/s / Turbo 8PSK / FEC 2/3 FEC is auto but it takes 3 or 4 tries before it turns blue.
    Last edited by yesmam; 01-11-2017 at 05:30 PM.

  8. #8
    Super Moderator
    Join Date
    Feb 2013
    Posts
    2,011
    R = V
    L = H

    do you have that correct ?
    IKS66.com #1 IKS Private Server

    -simple truth, rule #53
    Never take life seriously. Nobody gets out alive anyway.

  9. #9
    IKS66 Junior Member
    Join Date
    May 2015
    Posts
    14
    110w
    TP 1 = 12224 R / 21.500 MS/s / Turbo 8PSK / FEC 2/3 red
    TP 2 = 12239 L / 21.500 MS/s / Turbo 8PSK / FEC 2/3 red
    TP 3 = 12253 R / 21.500 MS/s / Turbo 8PSK / FEC 2/3 red
    TP 4 = 12268 L - 20000 Turbo 8PSK blue
    TP 5 = 12282 R / 21.500 MS/s / Turbo 8PSK / FEC 2/3 red
    TP 6 = 12297 L / 21.500 MS/s / Turbo 8PSK / FEC 2/3 red
    TP 7 = 12311 R / 21.500 MS/s / Turbo 8PSK / FEC 2/3 red
    TP 8 = 12326 L / 21.500 MS/s / Turbo 8PSK / FEC 2/3 blue
    TP 9 = 12341 R / 21.500 MS/s / Turbo 8PSK / FEC 2/3 red
    TP 10 = 12355 L / 21.500 MS/s / Turbo 8PSK / FEC 2/3 red
    TP 11 = 12370 R / 21.500 MS/s / Turbo 8PSK / FEC 2/3 red
    TP 12 = 12384 L -Spot Beam
    TP 13 = 12399 R / 21.500 MS/s / Turbo 8PSK / FEC 2/3red]
    TP 14 = 12414 L / 21.500 MS/s / Turbo 8PSK / FEC 2/3
    TP 15 = 12428 R / 21.500 MS/s / Turbo 8PSK / FEC 2/3
    TP 16 = 12443 L / 21.500 MS/s / Turbo 8PSK / FEC 2/3
    TP 17 = 12457 R / 21.500 MS/s / Turbo 8PSK / FEC 2/3
    TP 18 = 12472 L -Spot Beam
    TP 19 = 12486 R / 21.500 MS/s / Turbo 8PSK / FEC 2/3
    TP 20 = 12501 L -Spot Beam
    TP 21 = 12516 R / 21.500 MS/s / Turbo 8PSK / FEC 2/3
    TP 22 = 12530 L / 21.500 MS/s / Turbo 8PSK / FEC 2/3
    TP 23 = 12545 R -Spot Beam
    TP 24 = 12559 L / 21.500 MS/s / Turbo 8PSK / FEC 2/3
    TP 25 = 12574 R -Spot Beam
    TP 26 = 12588 L -Spot Beam
    TP 27 = 12603 R -Spot Beam
    TP 28 = N/A
    TP 29 = 12632 R -Spot Beam
    TP 30 = N/A
    TP 31 = 12661 R -Spot Beam

    119w
    TP 1 = 12224 R -Spot Beam
    TP 2 = 12239 L -Spot Beam
    TP 3 = 12253 R -Spot Beam
    TP 4 = 12268 L -Spot Beam
    TP 5 = 12282 R -Spot Beam
    TP 6 = 12297 L / 21.500 MS/s / Turbo 8PSK / FEC 2/3
    TP 7 = 12311 R / 21.500 MS/s / Turbo 8PSK / FEC 2/3
    TP 8 = 12326 L / 21.500 MS/s / Turbo 8PSK / FEC 2/3
    TP 9 = 12341 R / 21.500 MS/s / Turbo 8PSK / FEC 2/3
    TP 10 = 12355 L / 21.500 MS/s / Turbo 8PSK / FEC 2/3
    TP 11 = 12370 R / 21.500 MS/s / Turbo 8PSK / FEC 2/3
    TP 12 = 12384 L / 21.500 MS/s / Turbo 8PSK / FEC 2/3
    TP 13 = 12399 R / 21.500 MS/s / Turbo 8PSK / FEC 2/3
    TP 14 = 12414 L / 21.500 MS/s / Turbo 8PSK / FEC 2/3
    TP 15 = 12428 R / 21.500 MS/s / Turbo 8PSK / FEC 2/3
    TP 16 = 12443 L / 21.500 MS/s / Turbo 8PSK / FEC 2/3
    TP 17 = 12457 R / 21.500 MS/s / Turbo 8PSK / FEC 2/3
    TP 18 = 12472 L / 21.500 MS/s / Turbo 8PSK / FEC 2/3
    TP 19 = 12486 R / 21.500 MS/s / Turbo 8PSK / FEC 2/3
    TP 20 = 12501 L / 21.500 MS/s / Turbo 8PSK / FEC 2/3
    TP 21 = 12516 R / 21.500 MS/s / Turbo 8PSK / FEC 2/3
    Last edited by yesmam; 01-11-2017 at 07:53 PM.

  10. #10
    Moderator whynot's Avatar
    Join Date
    Dec 2013
    Location
    Dark Side Of Moon
    Posts
    327
    give me a channel you want with sat number


 
Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •