Hello and welcome to our community! Is this your first visit?
Register
Page 1 of 2 12 LastLast
Results 1 to 10 of 14
  1. #1
    IKS66 Junior Member
    Join Date
    Oct 2014
    Posts
    23

    Need help with dreamlink lite setup

    I am using dreamlite_213_20131107.

    I am connected to the S1 server, and I can scan all the 110 channels. But all the channels are scrambled...

    What am I doing wrong?

  2. #2
    IKS66 Member
    Join Date
    Apr 2013
    Posts
    34
    Check your settings. You may need to unplug your modem router and ird.

  3. #3
    IKS66 Junior Member
    Join Date
    Oct 2014
    Posts
    23
    rechecked all settings... they seem fine.

  4. #4
    IKS66 Member
    Join Date
    Apr 2013
    Posts
    34
    Did you unplug everything and plugged it back in. Once you do that ping your server and see if you're getting a response.

  5. #5
    Super Moderator Sammy's Avatar
    Join Date
    Feb 2013
    Posts
    2,885
    Did you recheck the server settings and is your Route good?

  6. #6
    IKS66 Junior Member
    Join Date
    Oct 2014
    Posts
    23
    yes... I only have the 1 server and route. I did also do the verify route, and it's says active.

  7. #7
    IKS66 Member
    Join Date
    Apr 2013
    Posts
    34
    Did you ping the server and got a response back

  8. #8
    Super Moderator Sammy's Avatar
    Join Date
    Feb 2013
    Posts
    2,885
    When you exit the server section do you save and does it show (1)? Did you turn the server on?

  9. #9
    IKS66 Junior Member
    Join Date
    Oct 2014
    Posts
    23
    yes it shows connection (1)

  10. #10
    IKS66 Junior Member
    Join Date
    Oct 2014
    Posts
    23
    Factory Default..
    Hard Reboot with rear switch
    load Factory File.... Dreamlite_100_30125_factory
    Factory Default...
    Hard Reboot with rear switch
    Install latest 3rd party file.. Dreamlite_213_20131107
    Factory Default..
    Hard Reboot with rear switch
    .Do Parental controls. remove all.. makes it easer to setup. I think
    set timezone
    setup one sat Echostar 110W
    setup your P$ info.... ensure server is connected and on
    Hard Reboot with the rear switch...


    All the channels are still scrambled expect for the 3 or so "Info" channels


 
Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •