Hello and welcome to our community! Is this your first visit?
Register
Page 1 of 3 123 LastLast
Results 1 to 10 of 23
  1. #1
    IKS66 Member
    Join Date
    Oct 2014
    Posts
    29

    was a fta finatic 10 years ago, but new to the scene now

    Recently received my I-link 9800 HD SE w/wi-fi, and was hoping someone could steer me in the right direction.. I had originally a pansat 2700A, and use to get updates from dssrookie, but I understand there are servers operating?? which one is best and could I still just join a site and download as needed... my only internet access is hotspot on my phone...all advise would be greatly appreciated, a set-up guide for my box would be awesome, and also what did I-link include in with my box that looks like a little computer chip in bubble wrap about 3" x 2"?????thanks

  2. #2
    Super Moderator
    Join Date
    Feb 2013
    Posts
    2,032
    The bubble wrap item would be the HD module.
    IKS66.com #1 IKS Private Server

    -simple truth, rule #53
    Never take life seriously. Nobody gets out alive anyway.

  3. #3
    IKS66 Member
    Join Date
    Oct 2014
    Posts
    29
    thanks thunderstruck..any answers to my questions?? Your opinion would be much appreciated...

  4. #4
    Super Moderator Sammy's Avatar
    Join Date
    Feb 2013
    Posts
    2,885
    iks is a card share and requires a donation to make it work(iks66.com). No more stand alone . Hot spot can be setup.

  5. #5
    IKS66 Member
    Join Date
    Oct 2014
    Posts
    29
    so Sammy, thanks, I don't mind the fee if I can get this thing up and running..but you would recommend me just putting file on myself?? If so could you direct me to instructions to set up the 9800 SE?

    Thanks again



    Nothing Ventured Nothing Gained

  6. #6
    Super Moderator
    Join Date
    Feb 2013
    Posts
    2,032
    is this an IS ilink 9800 HD or an iLink Special Edition HD receiver ?

    I see you have SE in description.

    Give me a few minutes and I'll find a guide for us
    IKS66.com #1 IKS Private Server

    -simple truth, rule #53
    Never take life seriously. Nobody gets out alive anyway.

  7. #7
    Super Moderator
    Join Date
    Feb 2013
    Posts
    2,032
    ensure to use the correct software files for your receiver model

    set up guide.

    C/P
    1 Load SW file
    And do factory default 3 time,then check the sat list for echostar 14 and echostar 10/11-110w

    2-------donot use any other file because ur remote would stop workin.....if make that misstake u can use
    the reseiver front panel botton , by pressin it scroll , u can select update software , then select
    ur file from the usb,,,,at usb menu ::: In update file- scroll until u get to see the bin file
    then scroll down to.
    Upgrade mode and select <all code+boot_code> then scroll down to start,, then selec ok that is the center botton,,, file would start to downlod ..


    -----------------do not disturbe or disconct the box--------------------

    after finish ur remote is ok ..................

    Use the remote and select instalation..
    Press ok two time,, the sat list is display,,
    scroll up or down until u get to the disire sat,, then at satellite location pres ok once to do
    ur selection ,,,after sat is selcted ,, press exit onetime at instalation guide select --
    antena setup.......then ull get in to the real settin for ur selected sat,s.
    At the very bottom of the antena setup page is a blue dot for sat scan...this is the blue botton
    at the top of the remote,,, then wait until sacan is finish.......


    Server set up is located in the tools menu..............

    Do not use server o is for cccamd----------------
    enter your donation info ,, and below deskey setting is a connect info
    press it for seve and connect to the donation server.

    Wait for ::: Newcamd server login ok............

    Press exit all the way out and turn off the box from the back .....
    Wait for....network cable is connected....
    IKS66.com #1 IKS Private Server

    -simple truth, rule #53
    Never take life seriously. Nobody gets out alive anyway.

  8. #8
    IKS66 Member
    Join Date
    Oct 2014
    Posts
    29
    yes it is an SE model, and the above instructions are for a SE? the bin is the 333 that I load on there, correct?

  9. #9
    Super Moderator
    Join Date
    Feb 2013
    Posts
    2,032
    the above instruction should be generic for the SE 9800 and the IS 9800 models.

    yes, 333 version is correct.

    IS9800 SE_19May2014_V333 - fixes a remote control issue.
    IS9800 SE_08July13_V279 - first software file.
    i-link 9800 HD SE_20Mar2013_Factory - first and only factory file.
    IKS66.com #1 IKS Private Server

    -simple truth, rule #53
    Never take life seriously. Nobody gets out alive anyway.

  10. #10
    IKS66 Member
    Join Date
    Oct 2014
    Posts
    29
    so I need to install factory file first, then since my box is virgin, install 279 file..correct.. and thanks again..you are awesome!


 
Page 1 of 3 123 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •