Credit to Sp0iler:
Get the Wiz program.
Get the latest SVlan file for your box.
Get the Svlan-43 file.
Get a formatted usb stick.
Connect the hub to the box and the other end to your computer lan port.
Open the Wiz program and "Search" for your hub.
*DO NOT change anything with the Wiz program.*
What version shows ?
If your at 2.2 or higher, simply load the latest Svlan file to your box with your usb stick.Reboot the box and the "updating" message should appear. After the box reboots again, "Search" for the hub with the Wiz program.You should now be at version 4.12 and you now have a "Wizhub" and will use Svlan files from now on.
If your not at version 2.2 or higher,
Use the Wiz program and upload the Svlan-43 file.
After that, go through the process to load the latest SVlan file in receiver.
It's that easy if you have a good working hub.
I have been told this process has had good results at fixing version 82 and 82.9 errors.
Give it a try.
Good luck,
Sp0iler