C/P Hedo, Sump

HERE is the PROPER procedure for loading files onto a NEW K2HD unit.

1. Connect the box to the TV using the RED/WHITE/YELLOW analog cables.
2. Turn the unit on. Once you see the menu, navigate using the -> button to the software upgrade option.
3. Insert your USB with the BETA FACTORY file on it. File my be gotten here. K2 HD Files ... Then once you click on software update the FRONT USB should show BLUE, you should also see the file >>>> scroll down to highlight the factory file and hit OK on the remote >>>>you should then see a window showing the upgrade process. Go to #4
Issues
3a . When you insert the USB you should see the message "USB initializing"
3b. Some will have issue with the file extension name at this point, If you do .... You will need to rename the file EXTENSION from .kbx to .img. This can be done on your computer take the USB Stick back to the computer navagate to the file and rename it. Then put the USB stick back in the K2HD and start @ #3 again.

4. After the file is sucessfully loaded, (do NOT interupt the download!!!). Select your language, then go to the installation page and scroll down to the DATA RESET option do a factory default/RESET.
4a. Next load latest factory file ..Insert your USB with the Latest FACTORY file on it. File my be gotten here. K2 HD Files ... Then once you click on software update the FRONT USB should show BLUE, you should also see the file >>>> scroll down to highlight the factory file and hit OK on the remote >>>>you should then see a window showing the upgrade process. Go to #5
5. Select your language
6. For those using TRUE FTA ...... setup and scan your sats.

For those who wish to add THIRD party software is NOT recommended, (as it voids your warranty).

7. Go to the software upgrade option.
8. Locate the latest BIN that you loaded onto your USB stick
9. Start the download. Do NOT interupt the download!!!
10 After the BIN is successfully loaded, go to the DATA reset option. Do a FACTORY RESET.
11. Setup, and scan your sats.