If you plan on looking at birds 110 & 119 with authentic Dish (or bev) LNB's.
Use lnb type 11250 AND NOT DishPro 11250 in the antenna setup page.

Here some of the settings that worked for me...

main menu > installation > satellite setup > satellite list (scroll to ECHO 14 and hit the OK button on the remote)
repeat for ECHO 10/11

exit
scroll down to antenna setup (hit the OK button the remote)

Setup for ECHO 10/11...
LNB Freq : 11250 (NOT DISPRO 11250)
Transponder : 12224v 2000.............................................. ............( on my stb, 12239 H 2000 locks onto 110....but thats ok)....
DiSEqC1.0 : Port 1
DiSEqC1.1 : Disable
22k : off
Polarity : Auto
Multi SW : SW21 Dish 1
Motor DISEqC : Disable

A message at the bottom right side of the screen should indicate " ECHOSTAR 10 [110W] is locked

ok now setup 119...as follows...

scroll back up to the satellite line and hit the OK button on the remote...
A new screen opens up
select ECHO 14 and hit the OK button on the remote
set parameters as follows....

LNB Freq : 11250 ( NOT DISHPRO 11250)
Transponder : 12297 H 2000
DiSEqC1.0 : Port 2
DISEqC1.1 : Disable
22K : on
Polarity : Auto
Multi SW: SW21 Dish 2
Motor DISEqC : Disable

Hit the EXIT button on the remote.
scroll down to MULTI SATELLITE SEARCH and hit the OK button on the remote.
Scroll down to SCAN START and hit OK button

complete scanning of both satellites should take roughly 10 minutes (perhaps more).