C/P

Process to restore your unit - fix issues of no video or continuous reboots or stuck on boot etc! If you have no video coming due to PAL issues there is an easy fix!

Download any working file like 2.4, 2.3, 2.2 etc (22.33 MB)

extract the zip file and rename the udf file to

pinwheelhdfactory_fw.udf

(note: if you are displaying file extension in Windows, the file will be pinwheelhdfactory_fw.udf and if you are not displaying file extensions in Windows then file will be pinwheelhdfactory_fw)

Take 1 blank USB drive - this drive should have nothing on it, except only one file

Put the file on the root folder of the USB drive

so the USB drive will only have pinwheelhdfactory_fw.udf file

Now unplug the unit from power

Insert the USB drive into any USB port

Hold the Front Power Down and keep holding it

Plug in power to your unit

You will see UPGRD on the front display, release the front power button

This will start the process of restoring the unit

As usual will take long to erase and write

After completing it will display FINSH on the front display

Remove USB Stick and reboot the unit and it should boot into the file without any issues