Hello and welcome to our community! Is this your first visit?
Register
Results 1 to 1 of 1
  1. #1
    Super Moderator
    Join Date
    Feb 2013
    Posts
    2,032

    Pansat 2500/FLU - conversion to PUFF

    Pansat 2500/FLU Conversion to PUFF

    c/p
    Here are simple instructions that you can use to convert your receiver to PUFF 1.0.3
    Download the attached folder. It has four files: Blacklist Loader, Ukronic Loader, PUFF 1.0.3 Boot file and the latest working bin file.
    Connect your receiver to your PC using the serial cable.
    Open Ukronic Loader and select the PUFF 1.0.3 bin file. Make sure you select the correct COM port. Also, the file type should be BOOT FILE.
    Turn your receiver ON and wait for the ON to display on the receiver's front panel.
    Click the DOWNLOAD button on the loader's screen and let the boot file load.
    After it's done, turn OFF your receiver from the back switch.
    Open Blacklist Loader and select the latest bin, which in this case is: Ukr_Jvvh-Team-PUFF_(Lzma)_v207
    Make sure the COM port is correct and BOOT option is selected.
    Turn ON your receiver and as soon as you see any light on the receiver's front panel, click the WRITE BIN button on the loader.
    The file will load. After it's done, close all the loader windows and disconnect your receiver from your PC.
    Attached Files Attached Files


 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •