Hello and welcome to our community! Is this your first visit?
Register
Results 1 to 3 of 3
  1. #1
    Super Moderator TAZ's Avatar
    Join Date
    Apr 2013
    Location
    Up the road
    Posts
    523

    Dreamlink SD Setup

    First make sure you have formatted your usb stick in your computer.

    When you put the files on the usb stick and place it in the Dreamlink SD a Usb Explorer window will pop up and show you the files on the stick.


    Place the factory file on it located here...
    dreamlink SD Factory_latest factory file

    After its loaded do factory reset. Then go flip the back switch off then on.



    Then put the latest file on it here....
    dreamlink SD_latest file


    Again do a factory reset and again after its completed flip the back switch off then back on.



    Set your sats up...Menu to installation...then dish settings.

    When done exit and save.

    Next go to Menu to Configuration...Set your Time and your A/V Output Settings and also UI Settings.

    Then to Network Settings and hit the Blue butoon on remote to set up your servers. A box will appear select password 0000.

    You have 5 private server you can put in.Myself i have 2 activated most times. One for Bev and one for DN.

    To place your servers in take time and make sure all your ps settings are right.Here how to do...

    Name or ip..after done push exit

    Ports...when done push arrow down on remote directional pad

    Id ...after your done press exit

    Password...after done press exit

    Des Key..after done press exit

    Connect....press ok and see if it connects, if it says not connected hit it again and see if it does. If not you havnt put in the ps setting right.

    Press exit ...you will be back to server setup...make sure you see your ps is on not off.

    Press exit again you will be back to Network Settings leave it sit three you will see a box pop up and it will tell you which servers are connected.Will say Network is Connected (4)(3) if you have 2 activated. Exit out if connected.

    I have mine on DHCP in Network setting and mine populated no problem.

    Then in Menu go to Channel List and do parental control or set a favorite list.

    Next is Utilities thats where you can see System Information on your box. Mp3 Player is there...Image Viewer Data transfer if you want to save Ch list or put a file on and also the PVR Menu

    Which i think you all know what to do in those places.

    Thats it folks you should be connected and now get to enjoy this great small great looking box.

    Oh a note the Dreamlink HD remote will operate the Dreamlink SD box.

    thanks Bman

  2. #2
    IKS66 Junior Member
    Join Date
    Oct 2013
    Posts
    2
    taz......,are this set ut apply to the: dl sd hdmi also

  3. #3
    Super Moderator
    Join Date
    Feb 2013
    Posts
    2,032
    yes, same setup basically BUT ensure to use correct files for the HDMI receiver, and not the other SD Dreamlink files
    IKS66.com #1 IKS Private Server

    -simple truth, rule #53
    Never take life seriously. Nobody gets out alive anyway.


 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •