PDA

View Full Version : after my pansat success



ChrisBreezy
02-13-2014, 06:55 AM
i just ordered 2 jynxbox hd3 jb200 receivers and a DISH PRO PLUS DPP44 MULTI switch with power inserter.. i wanna get all the channels lol. costly but we payed 110 a month for cable till we canceled, it'll pay itself off in a couple months.. will be getting more routes when set up.. i have one dish but can easily get more.. all u got to do is ask people... went to random apt complexes and asked if they were using there dish lol if no he usually took em.. it was fine with them.. but i just want to say thank you US government for the tax refund and iks66 for the service you provide.. its excellente!!

NPRFTAMAN
02-13-2014, 01:42 PM
Chris, Do you have a Pansat ? I have a 2500 and was wondering if you got it to connect to IKS66 . If so PM me as to how?

ChrisBreezy
02-13-2014, 02:16 PM
i pmed you this is my rq-sssp settings.. gotta mess with sat setup in pansat.. 11250 for 110, 119 ans 22khz ON.. you can go to tps and flip through them see if your gettin signal.. when sat settins are correct you will see two bars one for sig quality and top is just signal..
remember if your using windows 7.. run rq-sssp in windos xp compatability mode and i check the run as administrotor tab two.. just right click the exe file and you can change to do that...
just copy those settings go to the rq-ssp. conf delete whatevers there paste this change your serial com port to wherever your connected and iks66 key.. click save and run rq-sssp
##########################################
# Set serial port PANSAT is connected to #
##########################################

serial_port=COM3

serial_port_settings=115200|8|N|1

byte_write_delay=100

receiver_protocol=1

caid_mappings=

return_single_cw=0

background_execution=0

debug_level=1

log_to_console=1

log_to_file=0

logfile_name=/rq-sssp-client.log

control_words_timeout=12
#########################
iks66
##########################

card_server_url_1=newcamd://(13numberiks66code):(13numberiks66code)@31.220.2.4 3:50066/1234123412341234123412341234

ChrisBreezy
02-13-2014, 02:22 PM
use a colon in between your 13 letter code.. card_server_url_1=newcamd://1234567890123:[email protected]:50066/1234123412341234123412341234

ChrisBreezy
02-13-2014, 02:34 PM
o and go to pansat part and you will find your iks file and rq sssp downloads.. everything you will need to get it set up is in the pansat downloads on this site.. you will have to flash with iks file.. and theres a program you need to connect to pansat to flash.. its in the dl section.. you have to have a null modem cable.. i have a usb to r232 null modem cable works awesome in windows 7 when receivers on and cor connected pop into usb and windows 7 auto downloads drivers and sets up a com port. connect r232, open loader, flash pansat with iks, set up rq-sssp and sats.. have hooked up to comp with rqsssp connected and client ready status and scan for channels..

NPRFTAMAN
02-14-2014, 01:11 AM
Thanks so much wathing Sanfransico Bay news . Fnin Awesome!!!

ChrisBreezy
02-14-2014, 02:42 AM
np.. i had hell trying to figure it out at first took me a couple days.. but i got it

ChrisBreezy
02-14-2014, 09:08 AM
MOD could you move this to pansat part.. i didnt expect it to turn into a guide basically so it would be best served over there thanx

canefield
09-30-2014, 01:44 PM
i pmed you this is my rq-sssp settings.. gotta mess with sat setup in pansat.. 11250 for 110, 119 ans 22khz ON.. you can go to tps and flip through them see if your gettin signal.. when sat settins are correct you will see two bars one for sig quality and top is just signal..
remember if your using windows 7.. run rq-sssp in windos xp compatability mode and i check the run as administrotor tab two.. just right click the exe file and you can change to do that...
just copy those settings go to the rq-ssp. conf delete whatevers there paste this change your serial com port to wherever your connected and iks66 key.. click save and run rq-sssp
##########################################
# Set serial port PANSAT is connected to #
##########################################

serial_port=COM3

serial_port_settings=115200|8|N|1

byte_write_delay=100

receiver_protocol=1

caid_mappings=

return_single_cw=0

background_execution=0

debug_level=1

log_to_console=1

log_to_file=0

logfile_name=/rq-sssp-client.log

control_words_timeout=12
#########################
iks66
##########################

card_server_url_1=newcamd://(13numberiks66code):(13numberiks66code)@31.220.2.4 3:50066/1234123412341234123412341234

Thanks, your post helped with my receiver, byte_write_delay=100 did the trick for me.